Imp Pad OS by OscillatorSynk
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 86% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.
LFO 1 direct modulation amount for pulse width of square oscillator is 182.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 212.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 5.
Noise timbre
Noise level is manually set to 91.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 70.8Hz (70).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 143.93Hz (45) and is modulated by Pressure, Note Vel, LFO 1, VCF Env.
Pressure mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 37.
LFO 1 direct modulation amount for low-pass filter cut-off frequency is 50.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 120.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 162.
Note Num direct modulation amount for low-pass filter envelope amount is 121.
Filter resonance is statically set to 66% (169).
Oscillator drift & unison detuning timbre
Unison detune level is off.
Oscillators drift level is manually set to 12. Drift rate is 0
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
TC Deep Reverb fx
not yet complete
Mod Wheel modulator
Controls OSC 2 Pitch Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 2 Pitch Modulation Depth | 88 |
Pressure modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 37 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 121 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 120 |
| menu | VCF Envelope Velocity Sensitivity | 162 | |
| menu | VCA Envelope Velocity Sensitivity | 107 |
LFO 1 modulator
Controls OSC 1 Pulse Width Modulation Depth, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 182 |
| timbre | fader | VCF Cut-off Frequency | 50 |
| name | value |
|---|---|
| LFO 1 Rate | 0.28Hz (67) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 97 |
| name | value |
|---|---|
| LFO 2 Rate | 0.6Hz (93) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sample & Hold |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | on |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 18 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 1.57s (158) |
| VCA Envelope Decay Time | 6.73s (184) |
| VCA Envelope Sustain Level | 21% (54) |
| VCA Envelope Release Time | 11.71s (198) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 120 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 1.62s (161) |
| VCF Envelope Decay Time | 19.9s (221) |
| VCF Envelope Sustain Level | 30% (76) |
| VCF Envelope Release Time | 21.32s (225) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |